Change Log

This file lists all important changes to ATS9371 Firmware

[34.01] - 2021-04-07

• Fixed a bug that was causing intermittent link problems in some computers.

[33.03] - 2021-01-28

• Fixed a bug that caused intermittent data corruption at slow data rates.

[31.12] - 2019-12-09

• Updated NPT footer logic to allow optional fixed 50 MHz timing.

• Also added NPT footer capability in 12-bit packed mode for dual channel acquisition.

[31.09] - 2019-09-26

• Fixed bug whereby overflow was not reported and data was allowed to be written into VFIFO even after an overflow, causing recording of corrupt lossy data.

[31.08] - 2019-05-28

• Added capability to do infinite buffers per trigger enable.

• Added FIFO overflow bit to Reg_07[6].

• Uses FFT v5.5 that supports 250 kHz trigger rate.

• Improved PCIe signal conditioning.

• Added NPT footer support in 12 bit packed mode.

[30.04] - 2018-09-17

• Fixes a bug in V30.03, whereby the FPGA version number was reported as 29.02.

[30.03] - 2018-08-30

• Uses FFT v5.2 that allows 250kHz trigger rate in RAW+FFT (as opposed to 200kHz) and also fixes a bug in REAL_ONLY and IMAG_ONLY outputs.

[28.08] - 2017-03-18

• Initial release.